Design Process Checklist CD-1

This is Design Process Checklist CD-1. The concept for these checklists was explained in an earlier post, Design Process Checklists. 


GENERAL - STEP I
  * Identify CD deliverables
  * Disciplines coordination/document checking
  * Submit for zoning permit

SITE PLANS - STEP I
  * Verify / update these items below
  * Property line
  * Street names for adjoining streets
  * Title block information (sheet title and number)
  * Drawing titles and scales
  * North arrow (incorporated into plan title)

FLOOR PLANS - STEP I
  * Verify / update these items below
  * Title block information (sheet title and number)
  * Drawing titles and scales
  * North arrow (incorporated into drawing title)
  * Site features immediately adjacent to building
  * Finished floor elevation indicated with a bullet
  * Column centerlines extending through the entire plan
  * Column designation bubbles labeled
  * General note about dimension system that is being used
  * Structural bays dimensioned
  * Overall building length and width dimensioned
  * Directional arrows on stair plans (even if an enlarged plan is drawn)

ROOF PLAN - STEP I
  * Verify / update these items below
  * Title block information (sheet title and number)
  * Drawing titles and scales
  * North arrow (incorporated into drawing title)
  * Column centerlines not extending through the entire plan
  * Column designation bubbles labeled
  * General note about dimensioning system that is being used
  * Structural bays dimensioned
  * Overall building length and width dimensioned

REFLECTED CEILING PLANS - STEP I
  * No tasks

ELEVATIONS - STEP I
  * Title block information (sheet title and number)
  * Drawing titles and scales
  * Finished floor elevations indicated with a bullet
  * Column centerlines not extending through the entire elevation
  * Column designation bubbles labeled
  * General note about dimension system that is being used
  * Finished grade at building face drawn as heavy line
  * Elevation of exterior features indicated with an elevation bullet

BUILDING SECTIONS - STEP I
  * No tasks

WALL SECTIONS - STEP I
  * Add / verify / update these items below
  * Title block information (sheet title and number)
  * Drawing titles and scales
  * Finished floor elevations indicated with a bullet
  * Column centerlines extending through the entire wall section
  * Column designation bubbles labeled
  * General note about dimension system that is being used
  * Roof slopes drawn correctly
  * Structural foundations, footings, and/or caissons drawn as broken
lines if beyond

VERTICAL CIRCULATION - STEP I
  * Input to floor plans, framing plans, sections, elevations

DETAILS - STEP I
  * No tasks

ENLARGED PLANS & INT ELEVATIONS - STEP I
  * No tasks

SCHEDULES - STEP I
  * No tasks

EQUIPMENT - STEP I
  * Input to floor plans, sections, elevations

STRUCTURAL - STEP I
  * Basement floor plan

MECHANICAL SYSTEMS - STEP I
  * Detailed systems selection
  * System drawings and key details
  * Input to floor plans, framing plans, sections, elevations

ELECTRICAL & LIGHTING SYSTEMS - STEP I
  * Detailed systems selection
  * Input to floor plans, sections, elevations

---

The series of 4 Checklists are linked here:
CD CHECKLIST 1
CD CHECKLIST 2
CD CHECKLIST 3
CD CHECKLIST 4